The Series 2 is a
Limited Run of 50 Guitars
due the
second week of April 2009.

-
Exceptionally figured and carved MAPLE top &
matching back
-
Choice of Maple in TIGER FLAME, QUILTED, BIRDSEYE OR
SPALTED
-
High quality tone wood MAHOGANY body and set neck
with 12” Radius
-
Double Bound body
-
Select Bound EBONY fret board
-
Split Block Style fret board inlay
-
Very fast neck
-
Individually Hand Carved Bone Nut
-
22 hand milled, leveled, crowned, hand polished
medium jumbo frets
-
Dual high output 4 Conductor hum cancelling pickups
(Covered or Zebra)
-
500K Push Pull Potentiometers for ultimate tone
-
EXCLUSIVE ELECTRONICS PACKAGE: 22 Sounds – COIL
TAP, OUT-OF-PHASE
-
3 position switch, 2 x Push Pull Volume and 2 x Push
Pull Tone
-
Chrome or Gold Hardware
-
2 piece Bridge with individually intonated saddles
-
Hard shell case
with chrome hardware

£299
includes a Hard Case,
Premium Electronics (22+ Sounds), Pro Setup,
Bone
Nut,
VAT
The guitars
will be available in the following
wood / colour
combinations:
|
Cherry
Sunburst / GOLD |
Quilted
Maple |
Zebra Humbuckers |
|
Cherry
Sunburst / CHROME |
Quilted
Maple |
Zebra Humbuckers |
|
Cherry
Sunburst / GOLD |
Flame
Maple |
Zebra Humbuckers |
|
Cherry
Sunburst / CHROME |
Flame
Maple |
Zebra Humbuckers |
|
Tobacco
Sunburst / GOLD |
Flame
Maple |
Zebra Humbuckers |
|
Tobacco
Sunburst / CHROME |
Flame
Maple |
Zebra Humbuckers |
|
Tobacco
Sunburst / CHROME |
Quilted
Maple |
Zebra Humbuckers |
|
Translucent Black / GOLD |
Flame
Maple |
Zebra Humbuckers |
|
Translucent Black / CHROME |
Flame
Maple |
Zebra Humbuckers |
|
Amber /
GOLD |
Flame
Maple |
Zebra Humbuckers |
|
Amber /
CHROME |
Flame
Maple |
Zebra Humbuckers |
|
Amber /
GOLD |
Birdseye
Maple |
Zebra Humbuckers |
|
Amber /
CHROME |
Birdseye
Maple |
Zebra Humbuckers |
|
Light
Amber (Honey) Burst / GOLD |
Flame
Maple |
Zebra Humbuckers |
|
Light
Amber (Honey) Burst / CHROME |
Flame
Maple |
Zebra Humbuckers |
|
Light
Amber (Honey)
/ GOLD |
Spalted
Maple |
Covered Humbuckers |
|
Light
Amber (Honey) / CHROME |
Spalted
Maple |
Covered Humbuckers |
|
Green /
GOLD |
Flame
Maple |
Covered Humbuckers |
|
Green /
CHROME |
Flame
Maple |
Covered Humbuckers |
|
Purple /
GOLD |
Flame
Maple |
Covered Humbuckers |
|
Red /
GOLD |
Flame
Maple |
Covered Humbuckers |
|
Blue /
GOLD |
Flame
Maple |
Covered Humbuckers |
|
White
Translucent / GOLD |
Flame
Maple |
Covered Humbuckers |
|
White
Translucent / CHROME |
Flame
Maple |
Covered Humbuckers |
The price of £299 represents a fantastic value – if you
were to go into a local guitar store and buy a guitar
for £299 you just get the guitar – NO CASE and certainly
NO PRO SETUP, NO PREMIUM ELECTRONICS, NO BONE NUT, NO
NEW STRINGS etc. All you would get is an off the shelf,
production line guitar with no individuality.

Here is how much a similarly set up £299.00 guitar would
cost you:
Guitar: £299.00
Hard Case: £50.00
Premium Electronics Installed: £100.00
Pro Setup on neck jig: £120.00
Bone Nut installed: £20.00
New Strings installed: £10.00
VAT: £89.85
TOTAL: £688.85
MY GUITAR: £299.00
For £299 you get a high quality, superior set up
guitar at an incredibly affordable price.
Each Guitar receives an extraordinary amount of individual attention. All
our guitars are given our pro set up on our neck jig
which simulates the tension of the strings while any
fret or neck work is being performed. We hand carve a
bone nut for each guitar individually and neck relief is
set to within measurements as small as 0.001” / 0.02mm.
All guitars come with a fresh set of Ernie Ball strings.

This kind of setup would normally cost you over
£120+, and that is only
if you can find a luthier who has access to a string
tension simulation jig.
We
believe that this approach ensures that every Guitar is
exceptional.

The electronics will give you the following control over
the sound of the guitar (Click
here to see a Schematic):
Bridge Volume Pot:
Pulling out the bridge volume pot
control puts both pickups in serial mode and bypasses
the selector switch. Thus both pickups will be in series
with the selector switch in any position. In this
position the bridge volume and tone control work
regularly as master controls, while the neck tone
control works like a treble booster, brightening up the
sound in a broad bucker configuration.
Neck Volume Pot:
The neck volume pot switch puts
the neck pickup out of phase. The effect is audible when
both pickups are selected, that is in a serial mode or,
when the guitar is in parallel mode, with the pickup
selector in the middle position. Moreover, when
the neck pickup is in single coil mode, this switch
selects which coil will be on.
Bridge Tone Pot:
Pulling the bridge tone pot
switches the bridge pickup from the serial Humbucker to
parallel (dual sound) or, when the neck tone control is
pulled too, to single coil.
Neck Tone Pot:
The neck tone pot switches the
neck pickup to single coil and, when the bridge tone
control is pulled, it also switches the bridge pickup to
single coil.
All guitars come with a no questions 14 day money back
guarantee and a 3 year limited warranty.
If you are interested in purchasing one of our Guitars,
please
email us or call on 02920 515 656
The price is £299 plus £15 Shipping to mainland U.K.
|